Expert Answers about Truck Bed Tie Downs
- Recommended Camper Tie Down for 2019 Nissan Titan XD with 5-1/2 Foot Bed
- I recommend the Brophy # HSAB. This does not show in the fit guide for a 5-1/2' bed as that short of bed is not generally used for truck campers. So you have to go by how they install to finish verifying. The external bed rail width cannot be more than 5-1/2 inches wide. There will need to be at least 2 inches space under the lip of the bed rail. This install by clamping onto the bed rails of your truck, no drilling required.
You will want to use the Brophy Basic Turnbuckles w/ Hardware...
view full answer... - Will Tie-Down Anchors Stop Water Getting in Stake Pockets in 2005 Dodge Ram 2500 With Tonneau Cover?
- The Erickson Retractable Tie-Down Anchors for Truck Bed Stake Pockets # EM01003 will provide a type of seal to the stake pockets of your 2005 Dodge Ram 2500 but they are not designed to keep water out so I could not guarantee you that it will eliminate water into your truck bed. It should give you some relief from the water pouring in, however, as well as providing useful attachment points.
There are also simple stake pocket covers, the TruXedo Stake Pocket Covers # TX1704210 which are...
view full answer... - Truck Bed Camper Tie Downs for 2000 Ford F250 with Plastic Bed Liner
- As long as your camper is no longer than 8 feet, and you do not mind having the tie-downs permanently installed in the stake pockets, the # TDSF tie-downs would be my recommendation. Unlike the # HSSF, trimming or cutting the bed liner will not be required. The # TDHP tie down hardware will also be needed to attach the camper to the tie down bracket.
You can see current pricing by clicking the provided link.
view full answer... - Do Brophy Camper Hold Downs Black Powder Coat, Part # HSSF, Stress Truck Bed Top Rails?
- The Brophy Camper Hold Downs, Part # HSSF, install without drilling and use the included padded T-bar hardware to evenly distribute forces downward and inward toward the inside of the truck bed. The top rail itself bears only some of the load from the tie-down points since most stress is distributed to the inside of the bed.
I have attached the installation instructions for this item for your review.
You will want to review this part for compatibility with your specific year/make/model...
view full answer... - Can etrailer Cargo Bag be Strapped Into Truck Bed
- Sure, if you have cargo tie-down points in your truck bed you can just strap down the etrailer Cargo Bag w/ Mounting Straps # 988501.
view full answer... - Installing Frame-Mount Camper Tie-Down On 1984 Chevrolet C/K Pickup Truck
- We do not have a custom tie-down kit for your 1984 Chevrolet pickup but I may have a solution for you.
I called my contact at TorkLift and they told me that you can look under the front of yoru truck bed near the cab and see if you have a 4x4 inch space available, you can install part # TLR3500. You would need to drill through the 4x4 space on your frame to mount the tie-downs for your camper.
For the rear you can use the same tie-downs but you will need the same 4x4 inch space on each...
view full answer... - Can a Trailer Hitch Mount to the Front of Ford F-350 Bed to Tie Down a Power Washer
- What you could do is use the Curt combo bar # E-9. Mounting something to the actual bed is not the best idea because the walls could be too weak or flimsy to hold or stabilize a heavy load. I wouldn't take the risk since the power washer is likely pretty heavy and if the straps failed, it could crush the truck bed where the ball mount is attached. You may need to fabricate something that is integrated into the bed supports or truck frame.
Once you secure the Curt combo bar # E-9, you...
view full answer... - Weight of TorkLift Truck Bed Camper Tie Downs for 2005 Ford Super Duty Truck
- The TorkLift # TLF2007 weighs just under 35 lbs and the # TLF3004 weighs just under 25 lbs minus the packaging.
view full answer... - Height of Adarac Pro Series Ladder Rack on 2022 Ram 1500 With 6-1/2 Foot Bed
- I checked with the manufacturer, Adarac, and verified that for your 2022 Ram 1500, the crossbars of the Adarac Pro Series rack are 24 inches above your bed rails. And regarding the difference between the two, it is simply the size of the bed they fit on a '22 Ram 1500:
- 6-1/2 Foot Bed : Adarac Pro Series Custom Truck Bed Ladder Rack # A42WG
- 5-1/2 Foot Bed : Adarac Pro Series Custom Truck Bed Ladder Rack # A35WG
So you'll want to choose the right one for your truck's bed size, and...
view full answer... - Aluminum and Steel TorkLift Camper Tie-Downs for 2019 Ford F-250 Super Duty With 6-3/4 Foot Bed
- There is a difference in price between the steel TorkLift Custom Frame-Mounted Camper Tie-Downs and the ones that are made from aluminum that fit your 2019 Ford F-250 Super Duty with a 6-3/4 foot bed, no boards or steps under the truck bed and either the factory hitch, SuperHitch Original 20K or SuperHitch Magnum 30K.
You can find the prices on the individual product page, and to convert that to Canadian money you will need to use your favorite conversion source; I'll also send a link...
view full answer... - How Many J-Hook Mounting Kits Are Needed To Secure A Toolbox In A Truck Bed
- To secure a toolbox in the bed of your truck you would need just one # DZ97904 kit. There are 2 J-hook tie-downs in a kit.
To mount the toolbox you just drill through the side of the toolbox, insert the included bolt through the box and attach the J-hook to the side of the bed rail, and tighten as needed. It is not necessary to drill through the truck bed rail for this installation.
view full answer... - Ladder Rack for a 2022 GMC Sierra 2500 with Standard Bed and No Cover
- I have a great ladder rack option for your 2022 GMC Sierra 2500 with standard bed and no cover. The Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501150 is a great option for a work truck. This ladder rack is an over-the-cab ladder rack with removable rear crossbar that lets you carry ladders and lumber on the rack while hauling appliances and furniture in your truck bed. It also features raised side rails that provide load support for your cargo and multiple cutouts that can...
view full answer... - What Are Cargo Management Rails And How Do They Work With Truck Bed Bike Racks 2014 Toyota Tundra
- The cargo management rails that our truck bed bike rack selection guide is referring to are side-rails that are installed on the inside of the truck bed frame rails. With these internal side rails installed you can add cross bars which will then give you two layers of cargo carrying ability. These rails are typically dealer installed and are not offered with all makes and models of trucks. I could not find where Toyota has these rails however this is an option on Ford trucks and Nissan...
view full answer... - Is The Price For TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2142 For The Pair
- Yes, the price you see for the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2142 is for the pair of front tie-downs.
Note: This tie-downs are a compatible fit for a 2019 Ram 3500 with an 8 Foot Bed - with board or step extending under bed and with a factory installed hitch or a TorkLift SuperHitch Magnum 30K.
If you need help finding the correct camper tie-downs for your application I'll just need to know the length of your Ram's bed, whether or not there are running...
view full answer... - Does TorkLift Offer Camper Tie Down Draw Bars as a Separate Item
- This question has come up before. In order to make the drawbar portions of the tie downs, TorkLift would need to do a special manufacturing run for just that particular item. This would considerably add to the cost of the product, which would end up costing you about the same amount of money, if not more as starting from scratch would.
Given this, I'd recommend simply starting from scratch. If your truck does NOT have running boards or a side step that extends under the bed (wheel to...
view full answer... - Comparing Steel and Aluminum TorkLift Frame Mount Camper Tie Downs for a 2022 Ford F-350 8' Bed
- I have attached for you below the shipping weights of each item you requested. The actual weight can be found by simply subtracting a few lbs for shipping material.
TorkLift Custom Frame-Mounted Camper Tie-Downs - Front part # TLF2021 (42 lbs)
TorkLift Custom Frame-Mounted Camper Tie-Downs - Front part # TLF2021A (38 lbs)
TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear part # TLF3008 (32 lbs)
TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear part # TLF3008A (28 lbs)
The camper...
view full answer... - How Much Does the CargoGlide 1500XL Sliding Truck Bed Tray Weigh?
- The CargoGlide 1500XL Sliding Tray for Trucks - 1,500 lbs - Steel Frame - 8" Rail - Drop Link # CG1500XL-9548GM has a shipping weight of 430 lbs so it likely will be just over 400 lbs when you remove the packaging. The assembled tray has a capacity of 1,500 lbs with tie down track weight capacity of 650 lbs for each of the 4 O-ring anchor points.
I've attached a couple photos to show fit and function.
view full answer... - Theft Options For A Demco Autoslide 5th Wheel Trailer Hitch In A 2012 Ram 2500 Bed
- With the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550022 weighing in at 300lbs the likelihood of it being stolen is pretty slim but there are still a couple options that you can take to help prevent theft. On the side mounting plates # DM6004 there are pins that prevent the puck handles from turning that you could pop out and put in some padlocks to prevent the handles from moving making it impossible to remove from your bed. The holes for these pins are just over 3/8" thick....
view full answer... - Is the TracRac TracOne Ladder Rack Lockable
- The TracRac TracOne ladder racks aren't lockable, but you could use a cable lock like the # e98891 ran through the tie down points located in the corner of many truck beds or the stake pockets to secure the ladder rack. Luckily enough, most thieves are lazy and just the sight of some sort of lock will make the majority of them move on to an easier target.
view full answer... - Is the Replacement Modular Upright for TracRac TracONE Truck Bed Ladder Racks Genuine
- The Replacement Modular Upright for TracRac TracONE Truck Bed Ladder Rack part # 8523446001 that you referenced is a genuine Thule part which means it is made by the same company who made the ladder rack. We also have tons of other genuine parts which I have attached a few of for you below. Please let me know if you need something that you do not see.
Replacement Crossbar for TracRac Ladder Racks part # TAFX-30007-02
Replacement Modular Base for TracRac Fixed Mount Ladder Rack (Left Front/Right...
view full answer...
Go To Results